Hydraulic Attachments — Augers
Hydraulic Attachments — 0.5–40 Ton Excavators & Skid Steers
VANROCK
Augers
VANROCK Augers are versatile tools capable of drilling widths ranging from 100 mm on smaller machines to an impressive 2.4 m on larger machines. With the ability to reach depths of up to 12 m — utilizing extensions and the appropriate auger drive — our augers excel in various applications. Whether you're digging post holes, fencing, signposts, constructing post frame buildings, foundation footings, or installing light and utility poles, our augers ensure efficiency and success in every job you undertake.
Earth / Taper / Rock
Shallow pitch flights
Most efficient ratio between quantity of earth removed and speed of operation.
Effective cutting angle
Constant spiral cut improves productivity. Fresh cut in every revolution.
Pilot and tooth option
Tungsten carbide tipped for excellent cutting performance, wear resistance and corrosion resistance.
Easy tooth locking
Simply unfasten the bolt and the tooth will slide out of the pocket with ease.
// The_Series
Choose from a wide range of VANROCK augers
Three ranges — earth, taper teeth and rock — covering drilling widths from 100 mm to 2.4 m and depths of up to 12 m using extensions and the appropriate auger drive.
Filter by product
3 / 3 models
Machine type
Auger type
Earth Auger
Efficient and cost effective auger for general purpose drilling in earth, clay, shale and soft rocks. Multi-faced tungsten teeth provide longer wear life and greater cutting performance.
Application
General purpose drilling
Ground
Earth, clay, shale & soft rock
Teeth
Multi-faced tungsten
Drilling width
100 mm – 2.4 m
Drilling depth
Up to 12 m with extensions
Carrier
0.5–40 Ton
// Wear_Parts
VANROCK pilot and teeth
The angle and geometry of the teeth to the pilot is the key to the efficiency in which these augers perform. This auger is fitted with Tungsten Taper Teeth for the ultimate ripping ability in fracturable rock, permafrost and general earth conditions. Explore our full range of replacement teeth and wear parts to keep your auger performing at its best.
// Engineering
Why VANROCK augers?
Four engineering decisions behind every VANROCK auger.
The most efficient ratio between quantity of earth removed and speed of operation — holding earth on the flights on removal.
// Drilling_Depth
Drilling Depth Guide
Drilling depth (m) by auger diameter and soil hardness.
| VR-AG 1000 | Diameter (mm) | 150 | 200 | 250 | 300 |
|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 3.5 | 3.0 | 2.5 | 2.5 |
| Drilling depth (m) | Medium | 3.5 | 3.0 | 2.4 | 2.4 |
| Drilling depth (m) | Hard | 3.0 | 3.0 | 2.2 | 2.2 |
| VR-AG 2000 | Diameter (mm) | 150 | 200 | 250 | 300 | 350 | 400 |
|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 3.5 | 3.0 | 2.5 | 2.5 | 2.4 | 2.0 |
| Drilling depth (m) | Medium | 3.5 | 3.0 | 2.4 | 2.4 | 2.2 | 1.8 |
| Drilling depth (m) | Hard | 3.0 | 3.0 | 2.2 | 2.2 | 2.0 | 1.5 |
| VR-AG 3000 | Diameter (mm) | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 |
|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 3.5 | 3.0 | 2.5 | 2.5 | 2.4 | 2.0 | 1.7 | 1.5 |
| Drilling depth (m) | Medium | 3.5 | 3.0 | 2.4 | 2.4 | 2.2 | 1.8 | 1.6 | 1.4 |
| Drilling depth (m) | Hard | 3.0 | 3.0 | 2.2 | 2.2 | 2.0 | 1.5 | 1.5 | 1.3 |
| VR-AG 5000 | Diameter (mm) | 150–600 | 650 | 700 | 750 | 800 | 850 | 900 |
|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 4.5 | 3.2 | 3.0 | 2.6 | 2.0 | 1.7 | 1.5 |
| Drilling depth (m) | Medium | 4.2 | 3.7 | 2.8 | 2.4 | 1.8 | 1.6 | 1.3 |
| Drilling depth (m) | Hard | 3.5 | 3.3 | 2.5 | 2.1 | 1.7 | 1.4 | 1.2 |
| VR-AG 8000 | Diameter (mm) | 150–500 | 550 | 600 | 650 | 700 | 750 | 800 | 850 | 900 |
|---|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 6.5 | 4.5 | 4.0 | 4.0 | 4.0 | 3.6 | 3.0 | 2.6 | 2.5 |
| Drilling depth (m) | Medium | 5.5 | 4.5 | 3.7 | 3.7 | 3.7 | 3.5 | 2.8 | 2.7 | 2.2 |
| Drilling depth (m) | Hard | 5.0 | 3.5 | 3.5 | 3.5 | 3.2 | 3.0 | 2.4 | 2.4 | 2.0 |
| VR-AG 10000 | Diameter (mm) | 150–500 | 550 | 600 | 650 | 700 | 750 | 800 | 850 | 900 | 1000 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 6.5 | 4.5 | 4.0 | 4.0 | 4.0 | 3.6 | 3.0 | 2.6 | 2.5 | 2.3 |
| Drilling depth (m) | Medium | 5.5 | 4.5 | 3.7 | 3.7 | 3.7 | 3.5 | 2.8 | 2.7 | 2.2 | 1.9 |
| Drilling depth (m) | Hard | 5.0 | 3.5 | 3.5 | 3.5 | 3.2 | 3.0 | 2.4 | 2.4 | 2.0 | 1.5 |
| VR-AG 18000 | Diameter (mm) | 150–400 | 500 | 600 | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 | 1100 | 1200 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 8.6 | 7.2 | 7.1 | 7.0 | 6.5 | 6.1 | 6.0 | 5.7 | 5.5 | 5.3 | 5.0 | 4.7 | 4.5 |
| Drilling depth (m) | Medium | 7.6 | 6.4 | 6.4 | 6.2 | 5.8 | 5.4 | 5.3 | 5.2 | 5.0 | 4.6 | 4.5 | 4.2 | 4.0 |
| Drilling depth (m) | Hard | 7.0 | 5.8 | 5.7 | 5.5 | 5.4 | 5.0 | 4.8 | 4.6 | 4.6 | 4.3 | 4.2 | 4.0 | 3.7 |
| VR-AG 30000 | Diameter (mm) | 150–400 | 450 | 500 | 550 | 600 | 650 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1500 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 9.0 | 8.6 | 8.6 | 8.6 | 8.6 | 8.4 | 8.0 | 7.6 | 7.0 | 6.5 | 6.3 | 6.0 | 5.0 |
| Drilling depth (m) | Medium | 8.2 | 7.7 | 7.7 | 7.7 | 7.7 | 7.5 | 7.3 | 6.8 | 6.3 | 6.0 | 5.7 | 5.5 | 4.6 |
| Drilling depth (m) | Hard | 7.3 | 7.0 | 7.0 | 7.0 | 7.0 | 6.8 | 6.6 | 6.2 | 5.7 | 5.3 | 5.0 | 4.8 | 4.0 |
| VR-AG 50000 | Diameter (mm) | 300–450 | 500 | 550 | 600 | 650 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1500 | 1800 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 12 | 12 | 11 | 11 | 11 | 10 | 9 | 9 | 8 | 8 | 7 | 6 | 4 |
| Drilling depth (m) | Medium | 11 | 11 | 10 | 10 | 10 | 9 | 7 | 7 | 6 | 6 | 5 | 5 | 3.3 |
| Drilling depth (m) | Hard | 8 | 8 | 7 | 7 | 7 | 7 | 6 | 6 | 5 | 5 | 5 | 4 | 2.5 |
| VR-AG 80000 | Diameter (mm) | 300–600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1500 | 1800 | 2000 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 15 | 14 | 14 | 14 | 12 | 12 | 10 | 8 | 8 | 7 |
| Drilling depth (m) | Medium | 11 | 10 | 10 | 10 | 9 | 9 | 8 | 7 | 7 | 6 |
| Drilling depth (m) | Hard | 8 | 7 | 7 | 7 | 7 | 7 | 6 | 6 | 6 | 5 |
| VR-AG 110000 | Diameter (mm) | 450–600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1500 | 1800 | 2000 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 19 | 18 | 18 | 18 | 16 | 16 | 14 | 12 | 12 | 11 |
| Drilling depth (m) | Medium | 14 | 13 | 13 | 13 | 13 | 13 | 11 | 10 | 10 | 9 |
| Drilling depth (m) | Hard | 10 | 9 | 9 | 9 | 9 | 9 | 8 | 8 | 8 | 7 |
| VR-AG 130000 | Diameter (mm) | 450–600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1500 | 1800 | 2000 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 22 | 21 | 21 | 21 | 19 | 19 | 17 | 15 | 15 | 14 |
| Drilling depth (m) | Medium | 16 | 15 | 15 | 15 | 15 | 15 | 13 | 12 | 12 | 11 |
| Drilling depth (m) | Hard | 11 | 10 | 10 | 10 | 10 | 10 | 9 | 9 | 9 | 8 |
| VR-AG 180000 | Diameter (mm) | 450–600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1500 | 1800 | 2000 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilling depth (m) | Soft | 27 | 26 | 26 | 26 | 24 | 24 | 22 | 20 | 20 | 19 |
| Drilling depth (m) | Medium | 20 | 19 | 19 | 19 | 19 | 19 | 17 | 16 | 16 | 15 |
| Drilling depth (m) | Hard | 14 | 13 | 13 | 13 | 13 | 13 | 12 | 12 | 12 | 11 |
// Related_Parts
Related Parts
Genuine VANROCK parts and accessories for augers — available through the dealer network.
Tungsten Carbide Tips for Augers
// Custom_Solutions
Can't find the ideal auger for your application?
We provide custom solutions to all our customers and offer augers that you can take advantage of.