HYDRAULIC ATTACHMENTS — DRUM CUTTERS
HYDRAULIC ATTACHMENTS — 0.5–70 TONS EXCAVATORS
VANROCK DRUM CUTTERS
VANROCK drum cutters are twin-header milling attachments for 0.5–70 ton excavators. Rotating pick-laced drums grind rock, concrete and frozen ground with low vibration, so they work beside sensitive structures, in tunnels and underwater. They excel in low-to-medium strength rock where breakers are too rough, and produce fine, reusable spoil.
LAST UPDATED · AUGUST 27, 2026
APPLICATIONS
AT / DC / CH / RU — SERIES
HIGH TORQUE HYDRAULIC MOTOR
For high productivity.
OPTIMIZED PICK PATTERN
For less wear and higher productivity.
WEAR-RESISTANT PLATES
For the protection of the central body.
WATER RESISTANT
Suitable for underwater work. 360° rotation models available.
IN THE FIELD — ROCK, CONCRETE AND SLOPES
MILLED TO THE LINE. ROCK, CONCRETE AND COAL.
Carbide picks on two counter-rotating drums take the material off layer by layer, so the finished surface sits exactly where the engineer drew it — trench floors and walls, cut slopes, tunnel profiles, coal faces and quarry benches. Low vibration protects the carrier and everything standing nearby, the fine uniform cuttings load straight into the truck, and with the VR-RU rotation unit the head turns to any working angle.
EXCAVATOR CARRIERS
CUTTING POWER
WITH VR-RU ROTATION UNIT
FIG. 01 TRENCH PROFILING · FIG. 02 SLOPE TRIMMING · FIG. 03 OPEN-PIT COAL MINING · FIG. 04 ROCK EXCAVATION IN A QUARRY
THE SERIES
VANROCK DRUM CUTTER SERIES
Twenty-six models across five series — axial, traverse T / TX, traverse TK, cutter heads and rotation units — covering carriers from 0.5 to 70 tons.
FILTER BY PRODUCT
26 / 26 MODELS
MACHINE TYPE
MATERIALS
SERIES
UNITS
AT — AXIAL5 MODELS
Axial (in-line) drum cutters — the cutting drum rotates around the same axis as the excavator stick, ideal for trench walls, pipe trenches, tunnel profiling and precise surface milling in confined spaces.
VR-AT 20
CARRIER
0.5–3.5 Tons
MAX POWER
25 kW
MAX FLOW
75 LPM
REC. FLOW
30–60 LPM
REC. PRESSURE
140–200 bar
MAX PRESSURE
240 bar
OUTPUT TORQUE
1824 Nm @ 200 bar
SHAFT SPEED
52–105 RPM
WEIGHT
85 kg
CUTTER BITS
28 pcs QUOTE
DC — TRAVERSE8 MODELS
Transverse twin-drum cutters — two counter-rotating drums mill parallel to the wall face for high removal rates in rock excavation, demolition, frozen ground and underwater work.
VR-DC 20T
1–3 Tons
22 kW
40 LPM
25–38 LPM
315 bar
1592 Nm
95 RPM
160 kg
44 pcs QUOTE
DC — TRAVERSE TK6 MODELS
TK transverse drum cutters separate the hydraulic motor from the drums: the motor sits in the central housing and drives both drums through a gear train, whereas in the T / TX series the motor is housed inside the drum. With no motor to enclose, the drums can be made smaller — a lighter cutter for the same carrier class with enhanced cutting power at the pick. Five models, VR-DC 20TK to 600TK, for 1–70 ton carriers, listed alongside the T / TX range so both can be compared.
VR-DC 20TK
45 LPM
20–40 LPM
2005 Nm
100 RPM
CUTTING FORCE
11460 N
230 kg
CH — CUTTER HEAD
Designed for excavator boom mounting, the cutter head specializes in precision profiling and finishing — tunnel roof resurfacing, deteriorated surface rehabilitation, concrete embankment trimming, industrial pavement renovation and municipal road maintenance. Dual-motor drive, adjustable cutting depth, quiet low-vibration operation and an optional dust suppression system.
VR-CH 300
20–40 Tons
MAX POWER TORQUE
105 kW
320 LPM
200–300 LPM
PRESSURE
17795 Nm @ 315 bar
56–85 RPM
2100 kg
68 pcs QUOTE
RU — ROTATION UNIT6 MODELS
Combined with the RU series rotation unit, attachments sit at the ideal position or operating angle for tunneling, trenching and profiling. Continuous no-limit two-way rotation via a hydraulic rotary joint, with solenoid valve and cab controller for effortless mode switching.
VR-RU 70
1–5 Tons
ROTATION SIZE
360×300×260 mm
80 LPM
350 bar
HOLDING TORQUE
10.4 kN
DRIVE MOTORS
1 pc
180 kg
ENGINEERING
WHY THE VANROCK DRUM CUTTER?
Six engineering decisions that deliver control, precision and durability.
A high torque hydraulic motor drives every VANROCK drum cutter for high productivity across profiling, trenching and excavation work.
KNOW-HOW
DRUM CUTTER KNOW-HOW
HOW A DRUM CUTTER WORKS
A drum cutter (twin-header) mounts a hydraulic motor between two rotating drums laced with pointed picks. Instead of shattering material by impact, it grinds rock, concrete or frozen ground away in a controlled milling action.
Cutting, not striking: material is removed as small chips at low vibration — the property that lets drum cutters work beside sensitive structures, under water and in tunnels.
Rock strength window: drum cutters excel in low-to-medium strength rock and unreinforced concrete; in very hard, massive rock a breaker or saw is the better tool.
Pick lacing and rotation speed determine the finish: profiling a tunnel wall and mass excavation use different setups of the same machine.
The spoil is fine and reusable, and there's no flying debris — a genuine advantage on urban and remediation sites.
CHOOSING THE RIGHT DRUM CUTTER
Size to the carrier and the rock, then decide the drum style for the job's geometry.
Carrier class: cutter weight and torque must match the excavator's weight class and auxiliary hydraulics — flow drives productivity more than pressure here.
Know your rock: get the unconfined compressive strength (UCS) of the material; it decides whether a drum cutter cuts economically or just polishes the face.
Drum type: standard twin drums for trench walls and mass profiling; cutter-head configurations for confined precision work.
Water and dust: for underwater or dust-controlled work, specify the appropriate sealing and spray options at order time.
Pick management: carry the correct spare picks and rotate them — cutting with worn picks multiplies fuel burn and slows advance dramatically.
WHERE DRUM CUTTERS EARN THEIR KEEP
Wherever impact is forbidden, too rough or too imprecise, milling wins.
Trenching in rock and hard soil: clean, straight-walled trenches without overbreak or blast permits.
Tunnel and shaft profiling: shaping walls, niches and cross-passages with millimeter-level control.
Concrete renovation: removing damaged concrete layers from structures while leaving sound material and rebar intact.
Frozen ground and soft-rock demolition: continuous production where breakers chatter and buckets bounce.
Underwater excavation: dredging and profiling below the waterline where impact tools lose most of their energy.
FAQ
DRUM CUTTERS FAQ
Match the cutter's weight class to your excavator's operating weight, and — critically for milling attachments — match its hydraulic flow demand to your auxiliary circuit, because a drum cutter converts flow directly into cutting speed. An undersupplied cutter still turns, but production falls off a cliff. VANROCK dealers verify carrier weight, flow and pressure against your machine before quoting.
CUSTOM SOLUTIONS
CAN'T FIND THE IDEAL DRUM CUTTER FOR YOUR APPLICATION?
We provide custom solutions to all our customers and offer drum cutters that you can take advantage of.