HYDRAULIC ATTACHMENTS — ROCK BREAKERS
HYDRAULIC ATTACHMENTS — 0.8–85 TONS EXCAVATORS
VANROCK ROCK BREAKERS
VANROCK rock breakers are hydraulic hammers for excavators and backhoe loaders from 0.8 to 85 tons. The range covers 17 models, from mini-excavator breakers to 85-ton quarry-class units, with impact energy matched to each carrier class. Every breaker ships factory-tested, with chisel, moil and blunt tools available, sold through authorized VANROCK dealers.
LAST UPDATED · AUGUST 27, 2026
APPLICATIONS
HD / TX — SERIES
TWO-STROKE SELECTOR — OPTIONAL
Switch between long and short stroke to match the application.
TPC VALVE CASE
Total Power Control — balanced, durable, 6-bolt fastened valve plate.
AUTO ABF SYSTEM — OPTIONAL
Anti blank firing protects chisel points, bolts and front heads.
NOK SEALING SYSTEM
High-quality NOK seals for a longer seal life than competitors.
THE SERIES
VANROCK ROCK BREAKER SERIES
Seventeen HD models covering carriers from 0.8 to 85 tons — silent and powerful, from compact machines to mining-class excavators.
FILTER BY PRODUCT
17 / 17 MODELS
MACHINE TYPE
CARRIER RANGE
UNITS
0.8–4.5 TONS
Compact silenced breakers for mini excavators — engineered for interior demolition, landscaping and utility trenching where low weight and precise control matter most.
VR-HD 10
CARRIER
1,800–3,300 lbs
OPERATING WEIGHT
265 lbs
TOOL DIAMETER
Ø1.42 in
PRESSURE
1,305–1,595 psi
OIL FLOW
4–7.9 GPM
IMPACT RATE
700–1300 BPM
IMPACT POWER
162 ft-lbs
HOSE SIZE
1/2"
ENGINEERING
WHY THE VANROCK ROCK BREAKER?
Nine engineering decisions that make it the breaker of choice from 0.8 to 85 tons.
Our innovative 2-stroke selector empowers users to seamlessly transition between long stroke and short stroke options based on the specific performance requirements of their application.
KNOW-HOW
HYDRAULIC BREAKER KNOW-HOW
HOW A HYDRAULIC BREAKER WORKS
A hydraulic breaker converts the excavator's oil flow into high-frequency impact energy. A piston, driven by hydraulic pressure and a nitrogen gas charge, strikes the working tool, and the tool transmits that shock into the rock or concrete until it fractures.
Impact energy vs frequency: bigger pistons hit harder but slower; smaller breakers hit faster with less energy per blow — hard, massive rock wants energy, thin concrete wants frequency.
The carrier feeds the breaker: correct oil flow and pressure decide whether the breaker delivers its rated performance — a starved breaker underperforms and overheats.
Down-force matters: the tool must be pressed firmly onto the material so blow energy travels into the rock, not back into the breaker and boom.
Blank firing — striking with no material resistance — is the top cause of premature wear; operating technique and anti-blank-firing features protect the investment.
CHOOSING THE RIGHT BREAKER
Breaker sizing is carrier-first: the excavator's weight class sets the breaker class, then the material fine-tunes the choice.
Carrier weight rule: the breaker (with tool and bracket) should sit within the manufacturer's stated carrier range — too heavy destabilizes the machine, too light and the carrier's own weight overdrives the breaker.
Match oil flow: verify your auxiliary circuit's flow and pressure against the breaker's requirement before anything else.
Material: massive, abrasive rock favors a heavier breaker with a blunt tool; reinforced concrete demolition favors a moil or chisel point and moderate energy.
Tool selection: moil point for concrete and soft rock, chisel for trenching direction control, blunt for hard rock breaking by energy transfer.
Duty cycle: for production breaking (quarry secondary, mass demolition), step up a size class and fit the appropriate wear package.
WHERE HYDRAULIC BREAKERS EARN THEIR KEEP
A breaker turns an excavator into a demolition and rock-excavation machine wherever blasting is impossible or uneconomic.
Demolition: foundations, slabs, walls and reinforced structures — break first, then process with a crusher bucket to close the recycling loop on site.
Trenching and pipeline work in rock: break the ledge as you dig, without drill-and-blast permits and exclusion zones.
Quarry secondary breaking: reduce oversize at the face instead of feeding blockages to the primary crusher.
Urban and confined sites: controlled impact where vibration limits, neighbors or utilities rule out blasting.
FAQ
ROCK BREAKERS FAQ
Start with the carrier's operating weight — every breaker has a stated carrier range, and staying inside it protects both machines. Then confirm your auxiliary hydraulic flow and pressure meet the breaker's specification. Finally consider the material: massive hard rock justifies the top of the range with a blunt tool; general demolition sits comfortably mid-range with a moil point. VANROCK dealers size the breaker to your exact machine model before quoting.
RELATED PARTS
Genuine VANROCK parts and accessories for rock breakers — available through the dealer network.
WORKING TOOLS
CHISEL PASTE
READY TO START
READY TO GET STARTED?
Contact our sales department today — we will be happy to assist you further.