What oil flow and pressure does VR-RP 50 need on a vibro ripper?
VR-RP 50 needs 270–330 LPM oil flow and 210–250 bar operating pressure. Its relief setting pressure is 280 bar.
That model is sized for 46–60 Tons carriers and has an operating weight of 5750 kg. Its working frequency is 2,160–2,640 bpm, and the specified air spring nitrogen pressure is 4 / 4.5 bar F / R.
Before ordering, check three points against the carrier hydraulic circuit:
- Continuous oil flow available: 270–330 LPM
- Operating pressure available: 210–250 bar
- Relief setting pressure: 280 bar
If the carrier cannot supply that hydraulic range, move to the model that matches both the excavator class and the oil flow available rather than sizing by weight alone.
Questions & Answers · VANROCK Group